[M3devel] results of threadtest program on Windows7

Thu Mar 3 02:17:44 CET 2011

Even with the change I made PutCard to PutInt?
That's the only failure I've seen.
I'll try on a non-virtual dual-proc machine later.

Thanks,
 - Jay

From: rcolebur at SCIRES.COM
To: m3devel at elegosoft.com
Date: Wed, 2 Mar 2011 19:42:47 -0500
Subject: Re: [M3devel] results of threadtest program on Windows7

Yes, it fails more often than it runs for me.
Regards,
Randy

From: jayk123 at hotmail.com [mailto:jayk123 at hotmail.com] On Behalf Of Jay K
Sent: Tuesday, March 01, 2011 5:59 AM
To: Mika Nystrom; Coleburn, Randy
Cc: m3devel
Subject: RE: [M3devel] results of threadtest program on Windows7

I haven't seen it fail on NT, except for PutCard in the test itself getting negative numbers.
I've run it just a few times now. One single and dual processor virtual machines.
Randy, has it failed many times for you?

 - Jay

> To: rcolebur at SCIRES.COM
> Date: Sun, 27 Feb 2011 15:11:25 -0800
> From: mika at async.caltech.edu
> CC: m3devel at elegosoft.com
> Subject: Re: [M3devel] results of threadtest program on Windows7
> 
> Ah, it just doesn't check command-line arguments that carefully.
> 
> I think what you did is equivalent to "-tests STD".
> 
> Mika
> 
> "Coleburn, Randy" writes:
> >Mika:
> >
> >No change with "-tests POSIX".
> >
> >Interesting twist: On Windows 7, I thought I'd see what the command line o=
> >ptions are, and I typed "threadtest -help" rather than reading the code.
> >
> >First time, it produced what appears to be a NIL deref crash. Then, I trie=
> >d it again and it ran to completion. Something seems non-deterministic her=
> >e. See below.
> >
> >C:\cm3\Sandbox\m3-libs\m3core\tests\thread\NT386>threadtest.exe -help
> >Writing file...done
> >Creating read threads...done
> >Creating fork threads...done
> >Creating alloc threads...done
> >Creating lock threads...done
> >running...printing oldest/median age/newest
> >.
> >
> >***
> >*** runtime error:
> >*** Attempt to reference an illegal memory location.
> >*** pc =3D 0x77762262
> >***
> >
> >Stack trace:
> > FP PC Procedure
> >--------- --------- -------------------------------
> > 0xcdf998 0x130351b SystemError + 0x64 in ..\src\runtime\NT386\RTSignal.m=
> >3
> > 0xcdf9c0 0x77762262 <???>
> > 0xcdf9d8 0x12e83b7 LockMutex + 0x4f in ..\src\thread\WIN32\ThreadWin32.m=
> >3
> > 0xcdfa00 0x12c7b08 GetChar + 0x28 in ..\src\rw\Rd.m3
> > 0xcdfb38 0x12c12e3 RApply + 0xd3 in ..\src\Main.m3
> > 0xcdfb74 0x12e971f ThreadBase + 0x254 in ..\src\thread\WIN32\ThreadWin32=
> >.m3
> > 0xcdfb80 0x76543677 <???>
> > 0xcdfbc0 0x77779f02 <???>
> >......... ......... ... more frames ...
> >
> >C:\cm3\Sandbox\m3-libs\m3core\tests\thread\NT386>threadtest.exe -help
> >Writing file...done
> >Creating read threads...done
> >Creating fork threads...done
> >Creating alloc threads...done
> >Creating lock threads...done
> >running...printing oldest/median age/newest
> >..........laziest thread is 0/0/0 (tests: read 0/0/0 fork 0/0/0 alloc 0/0/0=
> > lock 0/0/0)
> >..........laziest thread is 0/0/0 (tests: read 0/0/0 fork 0/0/0 alloc 0/0/0=
> > lock 0/0/0)
> >..........laziest thread is 0/0/0 (tests: read 0/0/0 fork 0/0/0 alloc 0/0/0=
> > lock 0/0/0)
> >..........laziest thread is 0/0/0 (tests: read 0/0/0 fork 0/0/0 alloc 0/0/0=
> > lock 0/0/0)
> >..........laziest thread is 0/0/0 (tests: read 0/0/0 fork 0/0/0 alloc 0/0/0=
> > lock 0/0/0)
> >..........laziest thread is 0/0/0 (tests: read 0/0/0 fork 0/0/0 alloc 0/0/0=
> > lock 0/0/0)
> >..........laziest thread is 0/0/0 (tests: read 0/0/0 fork 0/0/0 alloc 0/0/0=
> > lock 0/0/0)
> >..........laziest thread is 0/0/0 (tests: read 0/0/0 fork 0/0/0 alloc 0/0/0=
> > lock 0/0/0)
> >..........laziest thread is 0/0/0 (tests: read 0/0/0 fork 0/0/0 alloc 0/0/0=
> > lock 0/0/0)
> >..........laziest thread is 0/0/0 (tests: read 0/0/0 fork 0/0/0 alloc 0/0/0=
> > lock 0/0/0)
> >All tests complete. Congratulations.
> >
> >Regards,
> >Randy Coleburn
> >
> >-----Original Message-----
> >From: Mika Nystrom [mailto:mika at async.caltech.edu]=20
> >Sent: Sunday, February 27, 2011 3:30 PM
> >To: Coleburn, Randy
> >Cc: m3devel at elegosoft.com
> >Subject: Re: [M3devel] results of threadtest program on Windows7=20
> >
> >Hi Randy,
> >
> >You can try it with -tests POSIX as well.
> >
> >I find on user threads it runs very slowly (but it does run) because of how=
> > unfair
> >the thread scheduler is.
> >
> >Next step might be to whittle down the tests and see if you can get a failu=
> >re with
> >a single test running and -n 2. That would likely be the simplest scenario=
> > to
> >start further debugging from.
> >
> > Mika
> >
> >"Coleburn, Randy" writes:
> >>Mika et al:
> >>
> >>Thought I would try something else.
> >>
> >>I took the sources of your thread test program to an older XP machine that=
> > =3D
> >>has CM3 circa August 2008. This is the machine and implementation I used =
> >w=3D
> >>hen building a major project I did a couple years back.
> >>
> >>The thread test program does indeed build on this old system, but when I r=
> >u=3D
> >>n it, I get different results than with the latest HEAD branch code. =3D20
> >>
> >>After it prints "running...printing oldest/median age/newest", on the next=
> > =3D
> >>line I get two periods ".." and now the program seems hung. I'll let it "=
> >r=3D
> >>un" for a few more minutes to see if anything else happens before killing =
> >i=3D
> >>t.
> >>
> >>At least we don't get the subscript and assertion failures on this older C=
> >M=3D
> >>3 platform.
> >>
> >>Regards,
> >>Randy Coleburn
> >>
> >>
> >>-----Original Message-----
> >>From: Coleburn, Randy=3D20
> >>Sent: Sunday, February 27, 2011 2:09 PM
> >>To: m3devel at elegosoft.com
> >>Subject: Re: [M3devel] results of threadtest program on Windows7
> >>
> >>Mika:
> >>
> >>Ok, I've updated to latest HEAD and I've also built Jay's m3sleep program.
> >>
> >>Here is what happens now when I run your threadtest program on Windows 7.
> >>
> >>C:\cm3\Sandbox\m3-libs\m3core\tests\thread\NT386>threadtest -tests ALL,-fo=
> >r=3D
> >>k
> >>Writing file...done
> >>Creating read threads...done
> >>Creating nxread threads...done
> >>Creating tryexcept threads...done
> >>Creating forktoomuch threads...done
> >>Creating alloc threads...done
> >>Creating creat threads...done
> >>Creating lock threads...done
> >>running...printing oldest/median age/newest
> >>
> >>
> >>***
> >>*** runtime error:
> >>*** An array subscript was out of range.
> >>*** file "..\src\runtime\common\RTCollector.m3", line 418
> >>***
> >>
> >>
> >>
> >>***
> >>*** runtime error:
> >>*** <*ASSERT*> failed.
> >>*** file "..\src\thread\WIN32\ThreadWin32.m3", line 841
> >>***
> >>
> >>The last error repeats ad infinitum until I press CNTRL-C to abort.
> >>
> >>I'll send more info on the Windows install of Modula3 in a subsequent post=
> >.
> >>
> >>Regards,
> >>Randy Coleburn
> >>
> >>-----Original Message-----
> >>From: Mika Nystrom [mailto:mika at async.caltech.edu]=3D20
> >>Sent: Saturday, February 26, 2011 12:55 PM
> >>To: Coleburn, Randy
> >>Cc: m3devel at elegosoft.com
> >>Subject: Re: [M3devel] results of threadtest program on Windows7=3D20
> >>
> >>Hi Randy,
> >>
> >>Hm yes it looks like my Windows programming skills leave something
> >>to be desired.
> >>
> >>You can run the thread tester while skipping a test as follows
> >>
> >> threadtest -tests ALL,-fork
> >>
> >>(for instance)
> >>
> >>if you just run=3D20
> >>
> >> threadtest -sadfassdaf
> >>
> >>it'll print the tests that are available.
> >>
> >>As it happens, I just had to upgrade my windows 2000 system to windows 7.
> >>Can you give me a very brief description of what you did to install Modula=
> >-=3D
> >>3
> >>on this system?
> >>
> >> Mika
> >>
> >>"Coleburn, Randy" writes:
> >>>--_000_D67F02DDC62F7545A6B84C285F88F3E6EE25C849atlex02srv_
> >>>Content-Type: text/plain; charset=3D3D"us-ascii"
> >>>Content-Transfer-Encoding: quoted-printable
> >>>
> >>>Mika:
> >>>
> >>>I've finally managed to get cm3 rebuilt on Windows 7 again.
> >>>
> >>>So, I ran your threadtest program.
> >>>
> >>>Here are the results. Note the "..." is where I cut out a bunch of the r=
> >e=3D
> >>p=3D3D
> >>>eating "ERROR FApply" messages.
> >>>
> >>>C:\cm3\Sandbox\m3-libs\m3core\tests\thread\NT386>threadtest.exe
> >>>Writing file...done
> >>>Creating read threads...done
> >>>Creating fork threads...done
> >>>Creating alloc threads...done
> >>>Creating lock threads...done
> >>>running...printing oldest/median age/newest
> >>>ERROR FApply: OSError.E: ErrorCode=3D3D3D2: The system cannot find the f=
> >ile=3D
> >> sp=3D3D
> >>>ecified.
> >>>ERROR FApply: OSError.E: ErrorCode=3D3D3D2: The system cannot find the f=
> >ile=3D
> >> sp=3D3D
> >>>ecified.
> >>>ERROR FApply: OSError.E: ErrorCode=3D3D3D2: The system cannot find the f=
> >ile=3D
> >> sp=3D3D
> >>>ecified.
> >>>.
> >>>.
> >>>.
> >>>***
> >>>*** runtime error:
> >>>*** An enumeration or subrange value was out of range.
> >>>*** file "..\src\Main.m3", line 340
> >>>***
> >>>
> >>>laziest thread is 0/0/ERROR FApply: OSError.E: ErrorCode=3D3D3D2: The sy=
> >ste=3D
> >>m c=3D3D
> >>>annot find the file specified.
> >>>ERROR FApply: OSError.E: ErrorCode=3D3D3D2: The system cannot find the f=
> >ile=3D
> >> sp=3D3D
> >>>ecified.
> >>>ERROR FApply: OSError.E: ErrorCode=3D3D3D2: The system cannot find the f=
> >ile=3D
> >> sp=3D3D
> >>>ecified.
> >>>ERROR FApply: OSError.E: ErrorCode=3D3D3D2: The system cannot find the f=
> >ile=3D
> >> sp=3D3D
> >>>ecified.
> >>>.
> >>>.
> >>>.
> >>>laziest thread is 0/0/ERROR FApply: OSError.E: ErrorCode=3D3D3D2: The sy=
> >ste=3D
> >>m c=3D3D
> >>>annot find the file specified.
> >>>ERROR FApply: OSError.E: ErrorCode=3D3D3D2: The system cannot find the f=
> >ile=3D
> >> sp=3D3D
> >>>ecified.
> >>>ERROR FApply: OSError.E: ErrorCode=3D3D3D2: The system cannot find the f=
> >ile=3D
> >> sp=3D3D
> >>>ecified.
> >>>ERROR FApply: OSError.E: ErrorCode=3D3D3D2: The system cannot find the f=
> >ile=3D
> >> sp=3D3D
> >>>ecified.
> >>>.
> >>>.
> >>>.
> >>>ERROR FApply: OSError.E: ErrorCode=3D3D3D2: The system cannot find the f=
> >ile=3D
> >> sp=3D3D
> >>>ecified.
> >>>ERROR FApply: OSError.E: ErrorCode=3D3D3D2: The system cannot find the f=
> >ile=3D
> >> sp=3D3D
> >>>ecified.
> >>>Stack trace:
> >>> FP PC Procedure
> >>>--------- --------- -------------------------------
> >>>0x30fbd0 0x127218a PutStats + 0x1a3 in ..\src\Main.m3
> >>>0x30fcc0 0x1273825 Main_M3 + 0x11db(!) in ..\src\Main.m3
> >>>
> >>>Regards,
> >>>Randy Coleburn
> >>>
> >>>--_000_D67F02DDC62F7545A6B84C285F88F3E6EE25C849atlex02srv_
> >>>Content-Type: text/html; charset=3D3D"us-ascii"
> >>>Content-Transfer-Encoding: quoted-printable
> >>> 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://m3lists.elegosoft.com/pipermail/m3devel/attachments/20110303/cf2fb41d/attachment-0002.html>