[M3devel] Re: porting m3 on intel mac
Antony Hosking
hosking at cs.purdue.edu
Sun Jan 21 23:32:51 CET 2007
On 21/01/2007, at 5:06 PM, Renzo Orsini wrote:
>
> On Jan 21, 2007, at 22:57, Antony Hosking wrote:
>
>> For some reason your .stabs entries are different than mine, but
>> otherwise the assembler files are the same. Are you using the
>> cm3cg and cm3.cfg from my ftp site?
>
> Yes, downloaded a few hours ago.
>
>
>> Here is the version of the assembler that I have on my Intel Mac:
>>
>> Apple Computer, Inc. version cctools-590.42.1.obj~1, GNU assembler
>> version 1.38
>
> The mine is:
>
> Apple Computer, Inc. version cctools-622.5.obj~13, GNU assembler
> version 1.38
> (If it useful, my Xcode is 2.4.1, with Xcode IDE: 762.0, Xcode
> Core: 762.0, ToolSupport: 764.0, [From About XCode menu])
>
Hmmm -- different versions of the assembler. Probably some flag
needs adjusting.
>
>
>>
>> With respect to zeus, can you build with -verbose in the zeus
>> directory and send me the output? Sounds like one of the tools is
>> not getting built properly.
>>
>
> Ok, I am sending it as attachment
>
> <zeusoutput.txt.zip>
>
Sorry, wrong option. Please run with -commands. I suspect stubgen
is failing for you.
> Renzo
>
>
>> On 21/01/2007, at 4:47 PM, Renzo Orsini wrote:
>>
>>> You can find in the attachment the program and the compilation.
>>>
>>> Renzo
>>>
>>> <Archive.zip>
>>>
>>> On Jan 21, 2007, at 22:34, Antony Hosking wrote:
>>>
>>>>
>>>> On 21/01/2007, at 4:27 PM, Renzo Orsini wrote:
>>>>
>>>>> On Jan 21, 2007, at 21:49, Antony Hosking wrote:
>>>>>
>>>>>>
>>>>>> On 21/01/2007, at 7:59 AM, Renzo Orsini wrote:
>>>>>>
>>>>>>> Hello and lot of thanks!
>>>>>>>
>>>>>>> Everything is working really fine!
>>>>>>> The configuration: MacBookPro, MacOSX 10.4.8, XCode 2.4.1
>>>>>>> (gcc 4.0.1), X11 installed, latest cm3 sources (with
>>>>>>> anonymous CVS),
>>>>>>> The process:
>>>>>>> 1. unpacked cm3-min-POSIX-PPC_DARWIN-5.4.0.tgz
>>>>>>> 2. installed as super-user (every answer left as default, the
>>>>>>> only problem is the fact that motif is missing, ignoring)
>>>>>>> 3. replacing cm3, cm3.cfg, cm3cg from ftp://ftp.cs.purdue.edu/
>>>>>>> pub/hosking/m3/I386_DARWIN
>>>>>>> 3. running as su:
>>>>>>> do-cm3-core.sh buildship
>>>>>>> install-cm3-compiler.sh upgrade
>>>>>>> do-cm3-std.sh buildship
>>>>>>> everything is ok a part from producing about a zillion of
>>>>>>> assembler (?) warnings ("xxx.ms:nnn:indirect jmp without `*'),
>>>>>>> and failing at the end the compilation of package zeus (which
>>>>>>> I suppose is an old issue)
>>>>>>
>>>>>> That's odd since my builds go through cleanly.
>>>>>
>>>>> This is an example of the strange "indirect jump" message:
>>>>>
>>>>> pborsini:~/ProveModula3 orsini$ cat Main.m3
>>>>> MODULE Main; IMPORT IO; BEGIN IO.Put("Hello World\n"); END Main.
>>>>> pborsini:~/ProveModula3 orsini$ cm3
>>>>> --- building in I386_DARWIN ---
>>>>> new source -> compiling Main.m3
>>>>> Main.ms:101:indirect jmp without `*'
>>>>> -> linking prog
>>>>> _m3main.ms:74:indirect jmp without `*'
>>>>> _m3main.ms:89:indirect jmp without `*'
>>>>> _m3main.ms:108:indirect jmp without `*'
>>>>> pborsini:~/ProveModula3 orsini$ ./I386_DARWIN/prog
>>>>> Hello World
>>>>>
>>>>> maybe there is some problem with the linker parameters, however
>>>>> the progrum runs ok.
>>>>
>>>> Can you compile with "-keep" and send me the relevant .ms file?
>>>> I can compare with mine.
>>>>
>>>>>
>>>>> For what concerns zeus: the following is the output of cm3:
>>>>>
>>>>> === package /Users/orsini/modula3/cvsstuff/cm3/m3-ui/zeus ===
>>>>> +++ cm3 -build -override -DROOT='/Users/orsini/modula3/cvsstuff/
>>>>> cm3' +++
>>>>> --- building in I386_DARWIN ---
>>>>>
>>>>> new source -> compiling RemoteView_T_v1.i3
>>>>> "../I386_DARWIN/RemoteView_T_v1.i3", line 1: syntax error:
>>>>> missing INTERFACE or MODULE keyword
>>>>> "../I386_DARWIN/RemoteView_T_v1.i3", line 1: unable to find
>>>>> interface (<missing id>)
>>>>> "../I386_DARWIN/RemoteView_T_v1.i3", line 1: warning: file name
>>>>> (RemoteView_T_v1.i3) doesn't match module name (<missing id>)
>>>>> 2 errors and 1 warning encountered
>>>>> new source -> compiling RemoteView_T_v1.m3
>>>>> "../I386_DARWIN/RemoteView_T_v1.m3", line 1: syntax error:
>>>>> missing INTERFACE or MODULE keyword
>>>>> "../I386_DARWIN/RemoteView_T_v1.m3", line 1: unable to find
>>>>> interface (<missing id>)
>>>>> "../I386_DARWIN/RemoteView_T_v1.m3", line 1: warning: file name
>>>>> (RemoteView_T_v1.m3) doesn't match module name (<missing id>)
>>>>> 2 errors and 1 warning encountered
>>>>> compilation failed => not building library "libm3zeus.a"
>>>>> Fatal Error: package build failed
>>>>> *** execution of failed ***
>>>>>
>>>>> (and the files RemoteView_T_v1.i3 and RemoteView_T_v1.m3 are
>>>>> empty in I386_DARWIN, and they do not exists in src)
>>>>>
>>>>> Several other packages cannot be compiled, like many obliq
>>>>> ones, webvt, June and mentor.
>>>>>
>>>>> However the compiler seems to work for compiling my stuff,
>>>>> altough I have to make a few corrections and debugging.
>>>>
>>>> This sounds problematic since it implies that the generators for
>>>> those files are not working correctly. (If you run with "-
>>>> commands" you'll see which generator programs are being used.
>>>>
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Renzo
>>>>>
>>>>>>
>>>>>>>
>>>>>>> So, thank again to all and each of you, I am now very happy
>>>>>>> and busy by bringing our old modula-3 software to the new
>>>>>>> century!
>>>>>>>
>>>>>>> Cordially,
>>>>>>>
>>>>>>> Renzo Orsini
>>>>>>>
>>>>>>> On Jan 21, 2007, at 0:33, Darko wrote:
>>>>>>>
>>>>>>>> The latest, 10.4.8, also the latest XCode, which I think
>>>>>>>> updates gcc. You were addressing me weren't you? But Renzo
>>>>>>>> might like to answer that question too. XCode weighs in at
>>>>>>>> about 1G, by the way.
>>>>>>>>
>>>>>>>> On 21/01/2007, at 7:58 AM, Antony Hosking wrote:
>>>>>>>>
>>>>>>>>> What version of OSX are you using?
>>>>>>>>>
>>>>>>>>> On 20/01/2007, at 5:49 PM, Darko wrote:
>>>>>>>>>
>>>>>>>>>> No worries. I'm not familiar at all with those scripts.
>>>>>>>>>> The problem you are having may be to do with not having
>>>>>>>>>> the latest source, but it most probably has to do with the
>>>>>>>>>> version of gcc that is active on your machine. C files are
>>>>>>>>>> not compiled by cm3 but rather call gcc directly. I can't
>>>>>>>>>> remember which version of gcc is the correct one, but mine
>>>>>>>>>> currently is i686-apple-darwin8-gcc-4.0.1; also I can't
>>>>>>>>>> remember the command line for changing gcc versions. Tony
>>>>>>>>>> may be able to help re the correct version if 4.0.1
>>>>>>>>>> doesn't work. You may need to install the latest XCode
>>>>>>>>>> from http://developer.apple.com if you don't have 4.01.
>>>>>>>>>>
>>>>>>>>>> I've cc'd the list because they're actually very helpful
>>>>>>>>>> and my knowledge is limited...
>>>>>>>>>>
>>>>>>>>>> - Darko
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On 21/01/2007, at 6:58 AM, Renzo Orsini wrote:
>>>>>>>>>>
>>>>>>>>>>> First of all, thank you very much for your immediate help!
>>>>>>>>>>>
>>>>>>>>>>> I downloaded the files and replaced the corresponding /
>>>>>>>>>>> usr/local/cm3/bin files,
>>>>>>>>>>> modified cm3.cfg by replacing INSTALL_ROOT = "/usr/local/
>>>>>>>>>>> cm3-i386/" with INSTALL_ROOT = "/usr/local/cm3/"
>>>>>>>>>>> then in the full source (last version, 5.4.0) I did:
>>>>>>>>>>> scripts/do-cm3-core.sh buildship
>>>>>>>>>>> this is the result:
>>>>>>>>>>>
>>>>>>>>>>> root#./do-cm3-core.sh buildship
>>>>>>>>>>> CM3C =
>>>>>>>>>>> /Users/orsini/cm3/cm3-src-all-5.4.0/scripts/pkgmap.sh -c
>>>>>>>>>>> "cm3 -build -DROOT='/Users/orsini/cm3/cm3-src-
>>>>>>>>>>> all-5.4.0' && cm3 -ship -DROOT='/Users/orsini/cm3/cm3-
>>>>>>>>>>> src-all-5.4.0' " m3gc-simple m3core libm3 patternmatching
>>>>>>>>>>> m3middle m3linker m3front m3quake m3cc cm3 m3scanner
>>>>>>>>>>> m3tools m3cgcat m3cggen m3bundle bitvector digraph
>>>>>>>>>>> parseparams realgeometry set slisp sortedtableextras
>>>>>>>>>>> table-list tempfiles
>>>>>>>>>>> === package /Users/orsini/cm3/cm3-src-all-5.4.0/m3-libs/
>>>>>>>>>>> m3gc-simple ===
>>>>>>>>>>> +++ cm3 -build -DROOT='/Users/orsini/cm3/cm3-src-
>>>>>>>>>>> all-5.4.0' && cm3 -ship -DROOT='/Users/orsini/cm3/cm3-
>>>>>>>>>>> src-all-5.4.0' +++
>>>>>>>>>>> --- building in I386_DARWIN ---
>>>>>>>>>>>
>>>>>>>>>>> new source -> compiling RTVM.c
>>>>>>>>>>> new source -> compiling sysdeps.c
>>>>>>>>>>> new source -> compiling accept.c
>>>>>>>>>>> ../src/runtime/I386_DARWIN/accept.c: In function
>>>>>>>>>>> 'm3_accept':
>>>>>>>>>>> ../src/runtime/I386_DARWIN/accept.c:13: warning: pointer
>>>>>>>>>>> targets in passing argument 3 of 'accept' differ in
>>>>>>>>>>> signedness
>>>>>>>>>>> new source -> compiling bind.c
>>>>>>>>>>> new source -> compiling close.c
>>>>>>>>>>> new source -> compiling connect.c
>>>>>>>>>>> new source -> compiling dup.c
>>>>>>>>>>> new source -> compiling dup2.c
>>>>>>>>>>> new source -> compiling gethostbyaddr.c
>>>>>>>>>>> new source -> compiling gethostbyname.c
>>>>>>>>>>> new source -> compiling getpeername.c
>>>>>>>>>>> ../src/runtime/I386_DARWIN/getpeername.c: In function
>>>>>>>>>>> 'm3_getpeername':
>>>>>>>>>>> ../src/runtime/I386_DARWIN/getpeername.c:13: warning:
>>>>>>>>>>> pointer targets in passing argument 3 of 'getpeername'
>>>>>>>>>>> differ in signedness
>>>>>>>>>>> new source -> compiling getsockname.c
>>>>>>>>>>> ../src/runtime/I386_DARWIN/getsockname.c: In function
>>>>>>>>>>> 'm3_getsockname':
>>>>>>>>>>> ../src/runtime/I386_DARWIN/getsockname.c:13: warning:
>>>>>>>>>>> pointer targets in passing argument 3 of 'getsockname'
>>>>>>>>>>> differ in signedness
>>>>>>>>>>> new source -> compiling listen.c
>>>>>>>>>>> new source -> compiling read.c
>>>>>>>>>>> new source -> compiling recv.c
>>>>>>>>>>> new source -> compiling recvfrom.c
>>>>>>>>>>> ../src/runtime/I386_DARWIN/recvfrom.c: In function
>>>>>>>>>>> 'm3_recvfrom':
>>>>>>>>>>> ../src/runtime/I386_DARWIN/recvfrom.c:15: warning:
>>>>>>>>>>> pointer targets in passing argument 6 of 'recvfrom'
>>>>>>>>>>> differ in signedness
>>>>>>>>>>> new source -> compiling select.c
>>>>>>>>>>> new source -> compiling send.c
>>>>>>>>>>> new source -> compiling sendto.c
>>>>>>>>>>> new source -> compiling shutdown.c
>>>>>>>>>>> new source -> compiling socket.c
>>>>>>>>>>> new source -> compiling write.c
>>>>>>>>>>> -> archiving libm3gcdefs.a
>>>>>>>>>>> ld: common symbols not allowed with MH_DYLIB output
>>>>>>>>>>> format with the -multi_module option
>>>>>>>>>>> sysdeps.o definition of common _RTCSRC_FinishVM (size 16)
>>>>>>>>>>> sysdeps.o definition of common _RTHeapRep_Fault (size 16)
>>>>>>>>>>> /usr/bin/libtool: internal link edit command failed
>>>>>>>>>>> --- shipping from I386_DARWIN ---
>>>>>>>>>>>
>>>>>>>>>>> . => /usr/local/cm3/pkg/m3gc-simple/I386_DARWIN
>>>>>>>>>>> .M3EXPORTS libm3gcdefs.5.2.dylib"/Users/orsini/
>>>>>>>>>>> cm3/cm3-src-all-5.4.0/m3-libs/m3gc-simple/
>>>>>>>>>>> I386_DARWIN/.M3SHIP", line 3: quake runtime error: unable
>>>>>>>>>>> to copy "libm3gcdefs.5.2.dylib" to "/usr/local/cm3/pkg/
>>>>>>>>>>> m3gc-simple/I386_DARWIN/libm3gcdefs.5.2.dylib": errno=2
>>>>>>>>>>>
>>>>>>>>>>> --procedure-- -line- -file---
>>>>>>>>>>> install_file -- <builtin>
>>>>>>>>>>> 3 /Users/orsini/cm3/cm3-src-
>>>>>>>>>>> all-5.4.0/m3-libs/m3gc-simple/I386_DARWIN/.M3SHIP
>>>>>>>>>>>
>>>>>>>>>>> Fatal Error: package build failed
>>>>>>>>>>> *** execution of failed ***
>>>>>>>>>>>
>>>>>>>>>>> ======
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> I noticed that not all the .c files in .../m3-libs/m3gc-
>>>>>>>>>>> simple/src/runtime/I386_DARWIN/ where compiled, but I do
>>>>>>>>>>> not know if this is a normal behaviour.
>>>>>>>>>>>
>>>>>>>>>>> Thanks in advance for your time and patience!
>>>>>>>>>>>
>>>>>>>>>>> Cordially
>>>>>>>>>>>
>>>>>>>>>>> Renzo Orsini
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Jan 20, 2007, at 19:02, Darko wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Have a look here: ftp://ftp.cs.purdue.edu/pub/hosking/m3/
>>>>>>>>>>>> I386_DARWIN/
>>>>>>>>>>>>
>>>>>>>>>>>> There you'll find the bits you need for Mac Intel.
>>>>>>>>>>>> Replace your existing cm3, cmcg and cm3.cfg with the
>>>>>>>>>>>> ones there, then you can compile the basic libraries you
>>>>>>>>>>>> need like m3core and libm3, but make sure you have the
>>>>>>>>>>>> latest sources.
>>>>>>>>>>>>
>>>>>>>>>>>> I think they're the latest but Tony may have something
>>>>>>>>>>>> more to say about that.
>>>>>>>>>>>>
>>>>>>>>>>>> Darko.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On 21/01/2007, at 1:41 AM, Olaf Wagner wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> On Sat, Jan 20, 2007 at 03:05:55PM +0100, Renzo Orsini
>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>> Hello,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I installed cm3-min-POSIX-PPC_DARWIN-5.4.0.tgz on an
>>>>>>>>>>>>>> intel mac, then
>>>>>>>>>>>>>> tried to a compile a Hello world program, but the
>>>>>>>>>>>>>> compilation failed
>>>>>>>>>>>>>> with the following message:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> pborsini:~/ProveModula3 orsini$ cm3
>>>>>>>>>>>>>> --- building in PPC_DARWIN ---
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> new source -> compiling Main.m3
>>>>>>>>>>>>>> "../Main.m3", line 4: warning: potentially unhandled
>>>>>>>>>>>>>> exception: IO.Error
>>>>>>>>>>>>>> 1 warning encountered
>>>>>>>>>>>>>> Main.ms:12:no such instruction: `mflr r0'
>>>>>>>>>>>>>> Main.ms:13:no such instruction: `stmw r30,-8(r1)'
>>>>>>>>>>>>>> Main.ms:14:no such instruction: `stw r0,8(r1)'
>>>>>>>>>>>>>> Main.ms:15:no such instruction: `stwu r1,-96(r1)'
>>>>>>>>>>>>>> Main.ms:16:no such instruction: `mr r30,r1'
>>>>>>>>>>>>>> Main.ms:17:no such instruction: `bcl
>>>>>>>>>>>>>> 20,31,"L00000000001$pb"'
>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>> ....
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> So I suppose there is PPC code to assemble and the
>>>>>>>>>>>>>> Rosetta emulator
>>>>>>>>>>>>>> for PPC on intel macs cannot do anything for this!
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Since I would like to port the Fibonacci language for
>>>>>>>>>>>>>> databases,
>>>>>>>>>>>>>> which is written in Modula-3, if I understand well the
>>>>>>>>>>>>>> situation I
>>>>>>>>>>>>>> should port the Modula-3 compiler by cross compiling
>>>>>>>>>>>>>> it on a PPC mac,
>>>>>>>>>>>>>> or something like that.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I am asking you if you know about some effort of
>>>>>>>>>>>>>> porting Modula-3 on
>>>>>>>>>>>>>> intel macs, or at least if you let me know if this
>>>>>>>>>>>>>> operation is
>>>>>>>>>>>>>> possible (and also reasonably feasible in terms of
>>>>>>>>>>>>>> time and
>>>>>>>>>>>>>> expertise, given my teaching duties and my
>>>>>>>>>>>>>> difficulties with
>>>>>>>>>>>>>> assembler languages!), and, if so, if you can point me
>>>>>>>>>>>>>> to the correct
>>>>>>>>>>>>>> documentation to start with. Of course I will be very
>>>>>>>>>>>>>> glad to give
>>>>>>>>>>>>>> back to the community the result if I succeed!
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thank you very much for your attention.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Cordially
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Renzo Orsini
>>>>>>>>>>>>>> Associate Professor
>>>>>>>>>>>>>> Dipartimento di Informatica
>>>>>>>>>>>>>> Universita' Ca' Foscari di Venezia
>>>>>>>>>>>>>
>>>>>>>>>>>>> Well, I wouldn't have thought that you were even able
>>>>>>>>>>>>> to install
>>>>>>>>>>>>> the cm3-min-POSIX-PPC_DARWIN-5.4.0.tgz system on an
>>>>>>>>>>>>> Intel machine;
>>>>>>>>>>>>> it's surely not supposed to run on one. It shouldn't be
>>>>>>>>>>>>> too
>>>>>>>>>>>>> difficult to get a port of the latest CM3 for Darwin on
>>>>>>>>>>>>> Intel
>>>>>>>>>>>>> processors; I even think somebody was already working
>>>>>>>>>>>>> on it,
>>>>>>>>>>>>> but I don't really remember who, so I forward your mail to
>>>>>>>>>>>>> the m3devel list, in case others have already started
>>>>>>>>>>>>> such an
>>>>>>>>>>>>> effort.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Olaf
>>>>>>>>>>>>> --
>>>>>>>>>>>>> elego Software Solutions GmbH
>>>>>>>>>>>>> HRB 77719
>>>>>>>>>>>>> Olaf Wagner E-Mail: wagner
>>>>>>>>>>>>> (at)elego.de
>>>>>>>>>>>>> Ohmstraße 9 Tel: +49 30
>>>>>>>>>>>>> 40 04 19 29
>>>>>>>>>>>>> 10179 Berlin Fax: +49 30
>>>>>>>>>>>>> 23 45 86 95
>>>>>>>>>>>>> Cranachstraße 7 Tel: +49 30
>>>>>>>>>>>>> 85 58 01 81
>>>>>>>>>>>>> 12157 Berlin Fax: +49 30
>>>>>>>>>>>>> 85 58 01 88
>>>>>>>>>>>>> ------------------> WWW: http://www.elego-software-
>>>>>>>>>>>>> solutions.com
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> M3devel mailing list
>>>>>>>>>>>>> M3devel at elegosoft.com
>>>>>>>>>>>>> https://mail.elegosoft.com/cgi-bin/mailman/listinfo/
>>>>>>>>>>>>> m3devel
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> M3devel mailing list
>>>>>>>>>> M3devel at elegosoft.com
>>>>>>>>>> https://mail.elegosoft.com/cgi-bin/mailman/listinfo/m3devel
>>>>>>>>>
>>>>>>>>> Antony Hosking | Associate Professor
>>>>>>>>> Dept of Computer Sciences | Office: (765) 494-6001
>>>>>>>>> Purdue University | Mobile: (765) 427-5484
>>>>>>>>> 250 N. University Street | hosking at cs.purdue.edu
>>>>>>>>> West Lafayette, IN 47907-2066 | http://www.cs.purdue.edu/
>>>>>>>>> ~hosking
>>>>>>>>> _--_|\
>>>>>>>>> / \
>>>>>>>>> \_.--._/ )
>>>>>>>>> v /
>>>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>
>>>>>> Antony Hosking | Associate Professor
>>>>>> Dept of Computer Sciences | Office: (765) 494-6001
>>>>>> Purdue University | Mobile: (765) 427-5484
>>>>>> 250 N. University Street | hosking at cs.purdue.edu
>>>>>> West Lafayette, IN 47907-2066 | http://www.cs.purdue.edu/~hosking
>>>>>> _--_|\
>>>>>> / \
>>>>>> \_.--._/ )
>>>>>> v /
>>>>>>
>>>>>
>>>>
>>>> Antony Hosking | Associate Professor
>>>> Dept of Computer Sciences | Office: (765) 494-6001
>>>> Purdue University | Mobile: (765) 427-5484
>>>> 250 N. University Street | hosking at cs.purdue.edu
>>>> West Lafayette, IN 47907-2066 | http://www.cs.purdue.edu/~hosking
>>>> _--_|\
>>>> / \
>>>> \_.--._/ )
>>>> v /
>>>>
>>>
>>
>> Antony Hosking | Associate Professor
>> Dept of Computer Sciences | Office: (765) 494-6001
>> Purdue University | Mobile: (765) 427-5484
>> 250 N. University Street | hosking at cs.purdue.edu
>> West Lafayette, IN 47907-2066 | http://www.cs.purdue.edu/~hosking
>> _--_|\
>> / \
>> \_.--._/ )
>> v /
>>
>
Antony Hosking | Associate Professor
Dept of Computer Sciences | Office: (765) 494-6001
Purdue University | Mobile: (765) 427-5484
250 N. University Street | hosking at cs.purdue.edu
West Lafayette, IN 47907-2066 | http://www.cs.purdue.edu/~hosking
_--_|\
/ \
\_.--._/ )
v /
More information about the M3devel
mailing list